25-tonne Diesel Forklift | Kalmar DCG 250-25T Triplex 4660 mm

Rent the Kalmar DCG250 with 25 t capacity – Triplex mast 4660 mm
The Kalmar DCG250 is the heavy-duty forklift for loads from 25 tonnes, where standard industrial forklifts are no longer an option. With its triplex mast reaching a lift height of 4,660 mm and a load centre distance of 1,200 mm, this machine covers demanding handling situations in ports, steel construction and machinery manufacturing. Luibl Rental rents out the DCG250 with its own low-loader, inspection before handover and technical support – across Europe.
What tasks is the Kalmar DCG250 designed for?
The DCG250 is not an all-purpose heavy-duty forklift – it is built for precisely defined load scenarios. A rated capacity of 25 tonnes at a 1,200 mm load centre means: this machine picks up loads where even an 18-tonne truck such as the Kalmar DCG180 reaches its limits.
Typical applications:
Container handling and port logistics: 20-foot containers loaded with steel products or heavy cargo easily reach 18–22 tonnes. The DCG250 handles the first handling row on the terminal without relying on a reach stacker. A sufficiently sized manoeuvring area is required – the turning radius is 5,875 mm.
Steel construction and metalworking: Steel beams, coils and heavy semi-finished products are loaded and transported in-house with the DCG250. The load centre is decisive here: with long goods and eccentrically picked-up loads, the effective load centre shifts far forward – which reduces the residual capacity. The machine's load chart must always be consulted.
Precast concrete and building materials industry: Precast concrete elements, natural stone blocks and large-format building material packs regularly fall within the 20–25 tonne range. Here, the triplex mast allows stacking on the second storage level or transfer onto truck tipper bodies without unnecessarily increasing the collapsed height.
Mechanical engineering and heavy industry: Presses, machine tools, moulds – in-house transport on hall floors with a defined floor load capacity. Before use, the permissible surface load must be checked: with a load, the DCG250 weighs over 50 tonnes.
Timber industry and recycling: Paper bales, logs and scrap bundles in the heavy-load range. The diesel drive of the DCG250 delivers the necessary torque even in continuous operation and on unpaved ground.
Technical data – Kalmar DCG250 Triplex 4660 mm
| Feature | Value |
|---|---|
| Capacity (rated capacity) | 25,000 kg |
| Load centre distance | 1,200 mm |
| Mast type | Triplex |
| Lift height (max.) | 4,660 mm |
| Free lift | 1,550 mm |
| Overall height (mast lowered) | 2,735 mm |
| Drive | Diesel, 4-stroke |
| Engine | Cummins QSB6.7 turbo intercooler |
| Engine output | 168 kW at 2,200 rpm |
| Transmission | Hydrodynamic powershift, Dana TE17000, 3 / 3 gears |
| Dead weight | 32,990 kg |
| Overall length (without forks) | 6,340 mm |
| Overall width | 3,700 mm |
| Tyres | Pneumatic / pneumatic, 14.00×24 |
| Travel speed | 23 km/h laden / 27 km/h unladen |
| Mast tilt | 5° forward / 10° backward |
| Turning radius | 5,875 mm |
| Fuel tank | 375 l |
| Hydraulic pressure | 22.0 MPa |
All data refer to the specified machine configuration. Deviations are possible depending on year of manufacture and equipment variant.
The triplex mast – when it matters
On the Kalmar DCG250, the triplex mast is the equipment variant for higher lift height requirements combined with a controllable overall height. A three-stage mast design means:
The mast extends in three stages before reaching the full lift height of 4,660 mm. With a low collapsed height, the triplex mast allows higher transfer points to be reached – for example when loading semi-trailers with a raised loading platform or when filling bunker openings in raw material operations.
The free lift of 1,550 mm allows the load to be raised before the outer mast section extends – relevant in halls with mezzanine ceilings or when the mast height matters during travel.
Rent vs. buy: When is renting worthwhile?
Renting is economically superior when:
Project-based demand: The machine is needed for a defined project – installation of a production line, delivery and installation of a heavy-duty press, temporary expansion of handling capacity. The rental period ranges from one week to several months.
Utilisation below the threshold: As a rule of thumb: below 1,500 operating hours per year, renting pays off compared to ownership. At 1,500–2,500 hours, the result depends on capital commitment, maintenance organisation and residual value risk.
Bridging a machine breakdown: If your own machine fails while orders are running, short-notice rental availability is decisive. Luibl Rental keeps the DCG250 in its rental fleet – short-notice handover possible on request.
No in-house maintenance infrastructure: A 25-tonne heavy-duty forklift requires qualified service technicians and special tools. Without this infrastructure, renting also shifts the maintenance risk to the rental company.
Luibl Rental service: What the rental includes
Own logistics by low-loader: The DCG250 weighs around 33 tonnes unladen. Transport requires a heavy-duty low-loader with the appropriate permit. Luibl Rental handles transport, permits and scheduling from a single source.
Inspected handover: Every rental machine is handed over serviced and inspected.
On-site technical support: In the event of technical faults or operating questions, Luibl Rental provides service technicians directly at the site.
Briefing at handover: For the DCG250, Luibl Rental offers a personal briefing at machine handover on request: load chart, operating concept, safety devices, triplex mast operation.
Delivery: We organise delivery and transport by arrangement.
Related machines from the Luibl Rental fleet
If you do not need a 25-tonne truck or can manage with less capacity, Luibl Rental offers suitable alternatives:
The complete Kalmar & Hyundai heavy-duty forklift rental fleet provides an overview of all available capacity classes.
FAQ – Frequently asked questions about renting the Kalmar DCG250
Which mast does the Kalmar DCG250 have in the triplex variant?
The triplex mast of the DCG250 reaches a maximum lift height of 4,660 mm with a collapsed height of 2,735 mm. The free lift is 1,550 mm. This allows loads to be raised before the outer mast section extends – important for work under hall roofs or when driving through door openings.
Which engine does the Kalmar DCG250 have?
According to the data sheet, the Kalmar DCG250 is fitted with a Cummins QSB6.7 turbo intercooler diesel engine. The engine output is 168 kW at 2,200 rpm.
How much does it cost to rent a Kalmar DCG250?
The rental price depends on the rental period, the location of the site and the transport effort. On request, Luibl Rental prepares a transparent quote including low-loader logistics and inspection before handover. Send your enquiry online via the contact form.
How heavy is the Kalmar DCG250 and what does that mean for transport?
The dead weight is 32,990 kg. With payload, the total mass is around 58 tonnes. Transport requires an appropriately sized heavy-duty low-loader and transport permits. Luibl Rental takes care of transport and permit logistics in full.
Is the DCG250 suitable for indoor use?
In principle, yes – the prerequisites are: sufficient ceiling height, verified floor load capacity and sufficient aisle width. Luibl Rental supports you with the feasibility check.
Request a non-binding quote now
The Kalmar DCG250 with triplex mast 4,660 mm is available for short-notice handover in the Luibl Rental fleet. Delivery across Europe, inspection before handover and low-loader logistics included.
Request a quote | Arrange a callback
Key technical data
- Working height: 4.66 m
- Lift height: 4.66 m
- Capacity: 25,000 kg
- Horizontal outreach: 1.2 m
- Width: 3.7 m
Check availability now and request a quote.