TSH-12010 | Manitou MHT 10120
Manitou MHT 10120 Hire – The 12-Tonne Powerhouse for Rough Terrain
In the 12-tonne segment, lifting capacity alone does not determine whether a machine is fit for the job – what counts is the combination of lifting capacity, off-road performance and operator precision. The Manitou MHT 10120 meets all three requirements: 12,000 kg rated capacity at a 600 mm load centre, a lift height of 9.6 m at which 7,000 kg are still available, and a maximum horizontal reach of 5.35 m. Luibl Rental delivers this heavy-duty telehandler across Europe with its own low-loader fleet – serviced and inspected.
Performance for Industry and Specialist Construction
The MHT 10120 is designed as a high-capacity telehandler for applications in which standard machines reach their structural limits: heavy infrastructure components, machinery transport in mining, sewer works with large precast concrete elements and heavy-goods handling in the stone industry. An operating weight of approx. 17 tonnes means that the machine has sufficient counter-moment for high stability even at full load with the boom extended.
The tractive force of the MHT 10120 is 20,400 daN. This figure is relevant in practice for jobs in which the machine operates on soft ground, wet clay soil or unpaved site roads. Traction of its own is the basic prerequisite for lifting operations at full load not being interrupted by wheel slip. Luibl Rental customers particularly value the MHT 10120 for its high ground clearance and its traction on unpaved site terrain – two factors that directly determine downtime in quarries, civil engineering logistics and heavy machinery transport.
Technical Innovations: JSM Control and E-Reco System
The control architecture of the MHT 10120 is designed for one-handed operation at full load. The JSM multifunction joystick combines travel direction, telescopic functions and hydraulic control in a single control element. What this means in a 12-tonne heavy-duty context: the operator does not have to take their hand off the joystick during the entire lifting and positioning process. Changes of travel direction, boom telescoping and lifting can be controlled simultaneously without having to change grip or control. This reduces response delays in critical phases – for example when setting down heavy steel components on tight support points with a positioning tolerance of ±15 mm.
The E-Reco attachment recognition system is fitted as standard. It automatically recognises the connected attachment and adjusts the permissible load chart and the safety limits without operator intervention. When changing from pallet forks to a crane hook or winch, the system updates the operating parameters automatically – no manual reprogramming, no interruption of the workflow. For projects with frequent attachment changes between shifts, this is a measurable time advantage.
The load-sensing hydraulic pump delivers 275 l/min at 350 bar. The system provides hydraulic pressure on demand, reduces heat build-up in continuous operation and improves fine control of boom speed under partial load. Combined with the hydrostatic 2-speed transmission, this results in drive characteristics that can be precisely controlled both in fast transport mode at up to 25 km/h and at creep speed under full load.
Off-Road Capability without Compromise: Traction Meets Stability
Four-wheel drive with three selectable steering modes – front-wheel steering, four-wheel steering and crab steering – forms the basis of its off-road capability. Crab steering allows the machine to move sideways and is particularly relevant in quarries with narrow ramp descents and on construction sites with confined, parallel travel lanes.
Frame levelling compensates for uneven ground by 10 degrees to each side. This means that the machine can lift on hollows, lateral embankments and uneven industrial floors without the ground having to be levelled or the machine repositioned – a direct time saving on projects with changing set-down points along a site.
Gradeability is 31.5 % under load and 57.7 % unladen. For quarry operations and mining sites, where access ramps with gradients between 15 and 25 % are not the exception but the norm, this figure is a key data point when selecting equipment. The service brake is an oil-immersed multi-disc brake on the front and rear axles, the parking brake is an automatic negative brake. Both systems reliably secure the machine even on steep downhill sections.
The engine of the current ST5 model works with AdBlue exhaust aftertreatment.
Versatility in Use: From the Stone Industry to Steel Construction
Quarrying and raw material extraction: heavy rock blocks, drill hole collars and aggregates are handled with fork tines or grabs. Four-wheel-drive traction and high ground clearance allow use on loose overburden, where standard forklifts would ground out or sink into the soil.
Infrastructure and civil engineering: shaft components, pressure pipes and concrete segments for sewer works regularly exceed the 8-tonne mark. The MHT 10120 lifts these components directly into the installation position without the need for auxiliary equipment or rehandling between the means of transport and the installation site.
Heavy steel construction and bridge building: prefabricated girders, steel assemblies and bridge modules weighing up to 12 t are positioned with a crane hook or winch. One-handed operation via JSM allows simultaneous control of boom, telescope and travel direction – decisive when placing components with millimetre precision onto prepared anchor bolts.
Port logistics and container terminals: heavy units, machine parts in transport frames and heavy-goods containers are handled outdoors on ground with low bearing capacity. Frame levelling and the large 17.5-R25 tyres distribute the machine weight sufficiently to operate on asphalted port areas without damaging the surface.
FAQ: Frequently Asked Questions about the Manitou MHT 10120
What is the maximum load capacity of the Manitou MHT 10120?
The rated capacity is 12,000 kg at a load centre of 600 mm. At the maximum lift height of 9.6 m, 7,000 kg are available. The exact intermediate values for all boom positions and attachments can be found in the original Manitou load chart, which Luibl Rental includes with every machine handover.
How does attachment recognition work on the MHT 10120?
The E-Reco system automatically recognises the connected attachment via an electronic identification chip as soon as it is connected. The control unit loads the corresponding load chart and adjusts the overload cut-out accordingly. The operator receives confirmation of the recognised attachment and the updated safety parameters on the display. Manual reprogramming is completely eliminated – attachment changes therefore take only as long as the mechanical changeover itself.
How fast does the Manitou MHT 10120 travel?
The travel speed is up to 25 km/h. On request, Luibl Rental will clarify how the specific rental unit is equipped.
Which attachments can be combined with the MHT 10120?
Pallet forks, winch, crane hook, bucket, man basket, bale grab and tyre handler are compatible via the Manitou quick coupler. On request, Luibl Rental advises on available attachments and checks availability for the desired rental date.
Hire the Manitou MHT 10120 from Luibl Rental – Your Partner for Heavy Loads
Before every delivery, each Manitou MHT 10120 in the Luibl Rental fleet undergoes a complete functional check by trained specialist staff. The original Manitou data sheet including the load chart is supplied. On request, Luibl Rental provides technical support by a service technician for instruction or troubleshooting during the rental period.
Luibl Rental delivers the MHT 10120 with its own low-loader fleet, including to remote quarries, mining sites and hard-to-reach construction sites. We organise delivery and transport by arrangement.
Enquire now about availability and rental terms – quote promptly.
Send enquiry
Key Technical Data
- Lift height: 9.62 m
- Load capacity: 12,000 kg
- Lateral reach: 5.35 m
- Width: 2.5 m
- Height: 2.9 m
