Merlo Roto Telehandler rental: one machine for lifting, craning and working at height

Renting a Merlo Roto gives you a forklift, crane and aerial work platform in one machine: the superstructure rotates through 360 degrees while the chassis remains in one place on its outriggers. Luibl Rental has twelve Merlo Roto models in its rental fleet, with a load capacity of 4,000 to 7,500 kg and a lift height of 15.80 to 34.00 m.

On a tight site, every repositioning of a fixed telehandler takes time: retracting the outriggers, manoeuvring, realigning and setting up again. On facades, halls and high-rise work with many load points, this adds up over the course of the day. A rotating telehandler serves the entire circle around the machine from the same position. With the right attachment it also takes on tasks that would otherwise call for a mobile crane or a separate aerial work platform.

Image of a rental machine of type TSR-4016 | Merlo Roto 40.16

TSR-4016 | Merlo Roto 40.16

Lifting capacity
4.000 kg
Lifting height
15,80 m
Lateral reach
13,20 m
Dimensions
6,28 m x 2,24 m x 2,98 m
Drive unit
Diesel
Image of a rental machine of type TSR-4018 | Merlo Roto 40.18S

TSR-4018 | Merlo Roto 40.18S

Lifting capacity
4.000 kg
Lifting height
17,70 m
Lateral reach
15,00 m
Dimensions
6,03 m x 2,24 m x 3,03 m
Drive unit
Diesel
Image of a rental machine of type TSR-5021 | Merlo Roto 50.21S

TSR-5021 | Merlo Roto 50.21S

Lifting capacity
4.950 kg
Lifting height
21,00 m
Lateral reach
17,90 m
Dimensions
6,83 m x 2,43 m x 3,12 m
Drive unit
Diesel
Image of a rental machine of type Merlo Roto 60.24 MCSS

Merlo Roto 60.24 MCSS

Lifting capacity
6.000 kg
Lifting height
24,00 m
Lateral reach
20,00 m
Dimensions
7,43 m x 2,49 m x 3,10 m
Drive unit
Diesel
Image of a rental machine of type TSR-7024 | Merlo Roto 70.24S

TSR-7024 | Merlo Roto 70.24S

Lifting capacity
7.000 kg
Lifting height
24,20 m
Lateral reach
20,50 m
Dimensions
7,545 m x 2,49 m x 3,16 m
Drive unit
Diesel
Image of a rental machine of type Merlo Roto 75.25

Merlo Roto 75.25

Lifting capacity
7.500 kg
Lifting height
24,30 m
Lateral reach
20,50 m
Dimensions
7,61 m x 2,49 m x 3,12 m
Drive unit
Diesel
Image of a rental machine of type Merlo Roto 40.26

Merlo Roto 40.26

Lifting capacity
4.000 kg
Lifting height
26,00 m
Lateral reach
22,90 m
Dimensions
6,98 m x 2,40 m x 2,99 m
Drive unit
Diesel
Image of a rental machine of type TSR-5026 | Merlo Roto 50.26S

TSR-5026 | Merlo Roto 50.26S

Lifting capacity
4.950 kg
Lifting height
26,00 m
Lateral reach
22,90 m
Dimensions
7,15 m x 2,43 m x 3,12 m
Drive unit
Diesel
Image of a rental machine of type TSR-7028 | Merlo Roto 70.28S

TSR-7028 | Merlo Roto 70.28S

Lifting capacity
7.000 kg
Lifting height
28,00 m
Lateral reach
20,50 m
Dimensions
8,31 m x 2,54 m x 3,325 m
Drive unit
Diesel
Image of a rental machine of type TSR-5030 | Merlo Roto 50.30S Plus

TSR-5030 | Merlo Roto 50.30S Plus

Lifting capacity
4.950 kg
Lifting height
29,20 m
Lateral reach
25,40 m
Dimensions
7,79 m x 2,49 m x 3,16 m
Drive unit
Diesel
Image of a rental machine of type Merlo Roto 40.30 MCSS

Merlo Roto 40.30 MCSS

Lifting capacity
4.000 kg
Lifting height
29,50 m
Lateral reach
25,40 m
Dimensions
7,56 m x 2,49 m x 3,10 m
Drive unit
Diesel
Image of a rental machine of type TSR-5035 | Merlo Roto 50.35S Plus

TSR-5035 | Merlo Roto 50.35S Plus

Lifting capacity
4.950 kg
Lifting height
34,00 m
Lateral reach
27,00 m
Dimensions
8,59 m x 2,54 m x 3,325 m
Drive unit
Diesel
Mehr anzeigen

Twelve Merlo Roto models span 15.80 to 34.00 m lift height

The right Merlo Roto is determined by the lift height and the load at the furthest placement point. The rated load capacity only applies close to the machine; as the outreach increases, the permitted load falls sharply according to the load chart. Choose the model based on the least favourable load point rather than the highest load capacity.

Up to 21 m lift height: compact for tight sites and inner courtyards

  • Merlo Roto 40.16: 15.80 m lift height, 4,000 kg load capacity, 13.20 m outreach, 2.24 m wide
  • Merlo Roto 40.18S: 17.70 m lift height, 4,000 kg load capacity, 15.00 m outreach, 2.24 m wide
  • Merlo Roto 50.21S: 21.00 m lift height, 4,950 kg load capacity, 17.90 m outreach

24 to 28 m lift height: the class for building construction and installation

  • Merlo Roto 60.24 MCSS: 24.00 m lift height, 6,000 kg load capacity, 20.00 m outreach
  • Merlo Roto 70.24S: 24.20 m lift height, 7,000 kg load capacity, 20.50 m outreach
  • Merlo Roto 75.25: 24.30 m lift height, 7,500 kg load capacity, 20.50 m outreach
  • Merlo Roto 40.26: 26.00 m lift height, 4,000 kg load capacity, 22.90 m outreach
  • Merlo Roto 50.26S: 26.00 m lift height, 4,950 kg load capacity, 22.90 m outreach
  • Merlo Roto 70.28S: 28.00 m lift height, 7,000 kg load capacity, 20.50 m outreach

29 to 34 m lift height: for tall facades, industry and steel construction

  • Merlo Roto 50.30S Plus: 29.20 m lift height, 4,950 kg load capacity, 25.40 m outreach
  • Merlo Roto 40.30 MCSS: 29.50 m lift height, 4,000 kg load capacity, 25.40 m outreach
  • Merlo Roto 50.35S Plus: 34.00 m lift height, 4,950 kg load capacity, 27.00 m outreach

All models run on diesel. The complete technical data sheets can be found on each model page.

Roto or fixed: a Merlo Roto pays off with many load points in limited space

The Merlo Roto plays to its strengths where a fixed telehandler would have to be repositioned constantly. For straightforward material handling on open, level ground, a fixed machine is usually the more economical option.

  • Rotating superstructure: the Roto models slew the load around the machine. One position covers load points in front of, beside and behind the machine.
  • Outriggers: the Roto models only reach full lift height and outreach with the outriggers deployed. This provides stability at great height but takes time with every repositioning.
  • Lift height: the Roto range in the rental fleet starts at 15.80 m and goes up to 34.00 m. Below that, Fixed Telehandlers are sufficient for most tasks.
  • Space: because the chassis stays in place, the Roto needs less manoeuvring space than a fixed machine that has to drive up to each load point again.

If you mainly work with pallets on level ground, you will find suitable machines among the fixed Merlo telehandlers. An overview of all Merlo machines in the rental fleet is available on the Merlo rental page.

With attachments the Merlo Roto becomes a crane or an aerial work platform

The roto telehandler changes its role via the attachment. Each attachment has its own load chart, which the operator must know before use.

  • Fork carriage and pallet forks: lift material onto floors, scaffolding and roofs or unload trucks.
  • Load hook, winch and crane jib: the Roto works as a mobile crane and places loads over obstacles such as parapets or roof overhangs.
  • Platform: with a basket approved for the model, the Roto becomes an aerial work platform for installation, facade work and maintenance at great height.
  • Other attachments: buckets and special grabs are put together on request.

The overview Attachments for telehandlers shows which attachments suit your model. Mention the attachment you need right away in your enquiry, and we will schedule machine and attachment together.

Weight and outriggers determine whether the Merlo Roto fits your site

Depending on the model, a Merlo Roto weighs between 12,900 kg (Roto 40.16) and 23,350 kg (Roto 50.35S Plus). Check access, ground conditions and the set-up area before you send your enquiry.

  • Access: the models are 2.24 to 2.54 m wide and 2.98 to 3.325 m high. Gates, passages and bends on the way to the set-up position must be suitable for this.
  • Ground conditions: the outriggers transfer the load into the ground at specific points. On soft ground, backfill or above basement ceilings, load-spreading pads are required; if in doubt, a structural engineer decides.
  • Set-up area: allow space for the extended outriggers and the slewing range of the superstructure, and cordon off this zone during operation.
  • Transport: we organise delivery by low-loader to your site, throughout Belgium. The low-loader needs a paved surface for unloading.

For the Merlo Roto the operator needs additional training

Operating a rotating telehandler requires more than basic telehandler training. In Belgium, the employer must ensure under Belgian well-being at work legislation (Act of 4 August 1996 and the Code on Well-being at Work) that the operator has received adequate training for the machine and its use.

  • Basic training: qualifies for the telehandler in forklift mode.
  • Additional training for rotating machines: telehandlers with a rotating superstructure require additional, adequate training.
  • Additional training for platform and lifting work: anyone working with a basket or load hook needs additional training for each. In the basket, personal fall protection is mandatory, in line with the rules on work at height under the Code on Well-being at Work.
  • Instruction and appointment: the employer instructs the operator on the specific machine and appoints them as operator.

Luibl Rental does not provide training itself, but informs you about certified providers. Find out more on the Trainings page.

FAQ: Merlo roto telehandlers

chevronDown

How high does a Merlo Roto telehandler lift?

Up to 34.00 m: that is the lift height of the Merlo Roto 50.35S Plus, the largest Roto model in the Luibl Rental fleet. The smallest model, the Roto 40.16, reaches 15.80 m. Depending on the model, load capacity ranges from 4,000 to 7,500 kg; at great height and outreach, the permitted load according to the load chart is considerably lower.

What is the difference between a Merlo Roto and a fixed Merlo telehandler?

The Roto has a rotating superstructure, the fixed telehandler does not. A Roto slews the load around the machine and works from one position with its outriggers deployed. A fixed machine only lifts forwards and has to be repositioned for every new load point, but is usually more economical for straightforward material handling.

What training does the operator of a rotating telehandler need?

The operator needs adequate training for a telehandler with a rotating superstructure; under Belgian well-being at work legislation (Act of 4 August 1996 and the Code on Well-being at Work), the employer must ensure this. Working with a basket or load hook requires additional training for each. The employer also instructs the operator on the specific machine and appoints them as operator. Luibl Rental does not provide training itself, but its Trainings page informs you about certified providers.

Can a Merlo Roto be used as a crane?

Yes, with a load hook, winch or crane jib a Merlo Roto works as a mobile crane. Each of these attachments has its own load chart, and the operator needs the corresponding additional training. Please mention the attachment in your enquiry.

Can people be lifted to height with a Merlo Roto?

Yes, but only with a basket approved for the specific model. Everyone in the basket wears personal fall protection, and the operator needs additional training for this work.

How does a Merlo Roto get to the site?

By low-loader: we organise delivery to your site throughout Belgium. The Roto models weigh between 12,900 and 23,350 kg and are up to 2.54 m wide. Check access, the unloading zone and the bearing capacity of the ground in advance, and plan the job early so that machine and transport can be scheduled in good time.

Request a Merlo Roto: with these details we prepare your quote

The more precise your enquiry, the better our model proposal will match. These details help our scheduling team:

  • site location and rental period
  • required lift height and the heaviest load with its distance from the machine
  • attachments, for example basket, winch or forks
  • access and ground conditions at the set-up position

You will receive a quote with model, transport and attachments at short notice. Request a Merlo Roto now.