Manitou Roto Telehandler (MRT) rental: one machine for lifting, craning and working at height
Renting a Manitou roto telehandler gives you a forklift, crane and aerial work platform in one machine: the superstructure of the MRT range rotates through 360 degrees while the chassis remains in one place on its outriggers. Luibl Rental has ten MRT models in its rental fleet, with a load capacity of 4,000 to 7,000 kg and a lift height of 17.90 to 34.70 m.
On a tight site, every repositioning of a fixed telehandler takes time: retracting the outriggers, manoeuvring, realigning and setting up again. On facades, halls and high-rise work with many load points, this adds up over the course of the day. A rotating telehandler serves the entire circle around the machine from the same position. With the right attachment it also takes on tasks that would otherwise call for a mobile crane or a separate aerial work platform.
Ten Manitou MRT models span 17.90 to 34.70 m lift height
The right Manitou Roto is determined by the lift height and the load at the furthest placement point. The rated load capacity only applies close to the machine; as the outreach increases, the permitted load falls sharply according to the load chart. Choose the model based on the least favourable load point rather than the highest load capacity.
Up to 18 m lift height: compact for tight sites and inner courtyards
- Manitou MRT 1840: 17.90 m lift height, 4,000 kg load capacity, 15.10 m outreach, 2.39 m wide
- Manitou MRT 1845: 18.00 m lift height, 4,500 kg load capacity, 15.20 m outreach
21 to 26 m lift height: the class for building construction and installation
- Manitou MRT 2150 Privilege: 20.60 m lift height, 5,000 kg load capacity, 18.10 m outreach
- Manitou MRT 2260: 21.80 m lift height, 6,000 kg load capacity, 18.20 m outreach
- Manitou MRT 2550 Privilege: 24.70 m lift height, 5,000 kg load capacity, 21.40 m outreach
- Manitou MRT 2570: 24.80 m lift height, 7,000 kg load capacity, 20.50 m outreach
- Manitou MRT 2660: 25.90 m lift height, 6,000 kg load capacity, 21.70 m outreach
30 to 35 m lift height: for tall facades, industry and steel construction
- Manitou MRT 3060: 29.90 m lift height, 6,000 kg load capacity, 25.70 m outreach
- Manitou MRT 3570: 34.70 m lift height, 7,000 kg load capacity, 28.00 m outreach
- Manitou MRT 3570 ES: 34.70 m lift height, 7,000 kg load capacity, 28.00 m outreach
All models run on diesel. The complete technical data sheets can be found on each model page.
Roto or fixed: a Manitou Roto pays off with many load points in limited space
The Manitou Roto plays to its strengths where a fixed telehandler would have to be repositioned constantly. For straightforward material handling on open, level ground, a fixed machine is usually the more economical option.
- Rotating superstructure: the MRT models slew the load around the machine. One position covers load points in front of, beside and behind the machine.
- Outriggers: all MRT models have outriggers. They only reach full lift height and outreach with the outriggers deployed; this provides stability at great height but takes time with every repositioning.
- Lift height: the MRT range starts at around 18 m and goes up to 34.70 m. Below that, Fixed Telehandlers are sufficient for most tasks.
- Space: because the chassis stays in place, the Roto needs less manoeuvring space than a fixed machine that has to drive up to each load point again.
If you mainly work with pallets on level ground, you will find suitable machines among the fixed Manitou telehandlers. An overview of all Manitou types is available on the Manitou telehandlers page.
With attachments the Manitou Roto becomes a crane or an aerial work platform
The roto telehandler changes its role via the attachment. Each attachment has its own load chart, which the operator must know before use.
- Fork carriage and pallet forks: lift material onto floors, scaffolding and roofs or unload trucks.
- Load hook, winch and crane jib: the MRT works as a mobile crane and places loads over obstacles such as parapets or roof overhangs.
- Platform: with a basket approved for the model, the Roto becomes an aerial work platform for installation, facade work and maintenance at great height.
- Other attachments: buckets and special grabs are put together on request.
The overview Attachments for telehandlers shows which attachments suit your model. Mention the attachment you need right away in your enquiry, and we will schedule machine and attachment together.
Weight and outriggers determine whether the Manitou Roto fits your site
Depending on the model, a Manitou Roto weighs between 13,300 kg (MRT 1840) and 23,800 kg (MRT 3570). Check access, ground conditions and the set-up area before you send your enquiry.
- Access: the models are 2.39 to 2.50 m wide and 2.94 to 3.26 m high. Gates, passages and bends on the way to the set-up position must be suitable for this.
- Ground conditions: the outriggers transfer the load into the ground at specific points. On soft ground, backfill or above basement ceilings, load-spreading pads are required; if in doubt, a structural engineer decides.
- Set-up area: allow space for the extended outriggers and the slewing range of the superstructure, and cordon off this zone during operation.
- Transport: we organise delivery by low-loader to your site, throughout Belgium. The low-loader needs a paved surface for unloading.
For the Manitou Roto the operator needs additional training
Operating a rotating telehandler requires more than basic telehandler training. In Belgium, the employer must ensure under Belgian well-being at work legislation (Act of 4 August 1996 and the Code on Well-being at Work) that the operator has received adequate training for the machine and its use.
- Basic training: qualifies for the telehandler in forklift mode.
- Additional training for rotating machines: telehandlers with a rotating superstructure require additional, adequate training.
- Additional training for platform and lifting work: anyone working with a basket or load hook needs additional training for each. In the basket, personal fall protection is mandatory, in line with the rules on work at height under the Code on Well-being at Work.
- Instruction and appointment: the employer instructs the operator on the specific machine and appoints them as operator.
Luibl Rental does not provide training itself, but informs you about certified providers. Find out more on the Trainings page.
FAQ: Manitou roto telehandlers

How high does a Manitou roto telehandler lift?
What is the difference between a Manitou MRT and a fixed Manitou MT?
What training does the operator of a rotating telehandler need?
Can a Manitou Roto be used as a crane?
Can people be lifted to height with a rotating telehandler?
How does a Manitou Roto get to the site?
Request a Manitou roto telehandler: with these details we prepare your quote
The more precise your enquiry, the better our model proposal will match. These details help our scheduling team:
- site location and rental period
- required lift height and the heaviest load with its distance from the machine
- attachments, for example basket, winch or forks
- access and ground conditions at the set-up position
You will receive a quote with model, transport and attachments at short notice. Request a Manitou Roto now.